|
Before u take ur gun apart,
#1 ensure ur hopup rubber interior is fine, and not mashed up or ripped.
#2 crack the rifle open, and with ur fingers move the nozzle into the gearbox (push it in), if it resists and then pushes back then it is not a gearbox internal problem, might be a mag issue.
#3 if u find that ur nozzle is loose take the gerbox apart and put the nozzle back into the tappet plate slot however, this might be a broken tappet plate so eplace accordingly to wat the problem is.
#4 if it is the nozzle that is loose/not on tappet plate, check the double circle grooves of the nozzle (the ones the appet plate slot goes into), Ive encountered many JG V2's were the grooves on the nozzle crack on the sides.If they are cracked, then buy a madbull o-ring nozzle.
cheers,
tell us how this went
|