Airsoft Canada - View Single Post

mcguyver · April 16th, 2009, 18:10

The LED should blink once when you have the battery connected and select a fire mode.

If it's blinking about once/second or so, than it's a a problem.

Like I said, when I tested it, I ran it with the M130 and 9.6v, which is the toughest load for the PTW.

Do the batteries hold a charge? The 9.6v when properly charged will sit no-load at about 10.5-11V, the stay steady at 9.6V while under load.

If the battery has been stored depleted for long periods, it may take several charge/discharge cycles before they return to normal. If the battery was left connected in the gun, it may have been totally drained, and recovery may not be possible.

April 16th, 2009, 18:10	#3
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	The LED should blink once when you have the battery connected and select a fire mode. If it's blinking about once/second or so, than it's a a problem. Like I said, when I tested it, I ran it with the M130 and 9.6v, which is the toughest load for the PTW. Do the batteries hold a charge? The 9.6v when properly charged will sit no-load at about 10.5-11V, the stay steady at 9.6V while under load. If the battery has been stored depleted for long periods, it may take several charge/discharge cycles before they return to normal. If the battery was left connected in the gun, it may have been totally drained, and recovery may not be possible. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.