Airsoft Canada - View Single Post

Craig20 · April 17th, 2009, 10:54

i upgraded the spring to M150, full teeth aluminum piston, amp 5000 motor, and a 10.8v battery, put the gun back together and does not fire. when you pull the trigger the wires get hot because nothing turns. i blew the 15amp fuse and put in a 20amp. their is a faint clicking noise when the trigger is pulled. the motor does turn because i have tested it without fully in the gun.i have opened up the gearbox many times and all three gears i think are lined up correctly with the bushings on the outside. if you hve any solutions they would be appriciated.

April 17th, 2009, 10:54	#1
Craig20 Trader rating Join Date: Apr 2009 Location: Michigan	upgraded echo1 m733 will not fire i upgraded the spring to M150, full teeth aluminum piston, amp 5000 motor, and a 10.8v battery, put the gun back together and does not fire. when you pull the trigger the wires get hot because nothing turns. i blew the 15amp fuse and put in a 20amp. their is a faint clicking noise when the trigger is pulled. the motor does turn because i have tested it without fully in the gun.i have opened up the gearbox many times and all three gears i think are lined up correctly with the bushings on the outside. if you hve any solutions they would be appriciated. Last edited by Craig20; April 17th, 2009 at 16:26..