[Griffen]

I got a can of krylon flat mat black (good paint and dried super fast so i did 2 coats) then hit it with the tremclad clear. (Any clearcoat to protect the gun from sweat and anything taking the paint off) Use the clear very lightly!!!! From a good distance. This gun was more the 1/2 clear plastic with a orange tip. Make sure you cover all the working black parts with masking tap very well. I did all the trigger,hammer,safty,grip,number plates (so they can still be read). Then use a sharp exacto knife to cut the tape perfect. Paint and let er dry.