Airsoft Canada - View Single Post

Zakaib · May 30th, 2009, 16:12

Okay, so here's the story.

I just came into possession of a delightful custom ACM M500, and it works like a dream. There's a little bit of a problem with the screws connecting the loading tube and the barrel, in that they don't stay in, which means I've been holding it together with duct tape.

I don't want to glue it, because the ability to separate these is integral to repairing and accessing the rest of the gun. So I've been looking for some kind of ring/clamp mechanism, such as one you might find on a real shotgun, which may connect the two tubes together.

I've done some searching, to no avail. Can anyone point me in the right direction here?

Thanks

May 30th, 2009, 16:12	#1
Zakaib Trader rating Join Date: Apr 2009 Location: Downtown, Toronto, ON	M500 barrel/loading tube rings Okay, so here's the story. I just came into possession of a delightful custom ACM M500, and it works like a dream. There's a little bit of a problem with the screws connecting the loading tube and the barrel, in that they don't stay in, which means I've been holding it together with duct tape. I don't want to glue it, because the ability to separate these is integral to repairing and accessing the rest of the gun. So I've been looking for some kind of ring/clamp mechanism, such as one you might find on a real shotgun, which may connect the two tubes together. I've done some searching, to no avail. Can anyone point me in the right direction here? Thanks __________________ Dodge this.