Airsoft Canada - View Single Post

Fox Hound · May 25th, 2008, 14:24

My PTW is on its journey to failure. The 490 motor sounds like its about to go really soon. Sounds a bit like this "Grrrrrck" on every fire. It fires fine now though.

The PTW is a late 2007 M4a1 with that ball bearing installed at the bottom of the motor. I removed it as soon as i read it on here.

Also i had another problem with my blue cylinder and my FPS was so low, it was firing at 270fps. Thanks to Mcguyver, the problem was the position of that locking mechanism for the cylinder and the top reciever. I had it so i could remove the top cylinder with ease. I suppose it wasn't air tight so it leaked.

if anyone is selling a gold cylinder (used) let me know!

May 25th, 2008, 14:24	#70
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	My PTW is on its journey to failure. The 490 motor sounds like its about to go really soon. Sounds a bit like this "Grrrrrck" on every fire. It fires fine now though. The PTW is a late 2007 M4a1 with that ball bearing installed at the bottom of the motor. I removed it as soon as i read it on here. Also i had another problem with my blue cylinder and my FPS was so low, it was firing at 270fps. Thanks to Mcguyver, the problem was the position of that locking mechanism for the cylinder and the top reciever. I had it so i could remove the top cylinder with ease. I suppose it wasn't air tight so it leaked. if anyone is selling a gold cylinder (used) let me know! __________________ Last edited by Fox Hound; May 29th, 2008 at 18:09..