Airsoft Canada - View Single Post - KSC Glock 18c Part 258 Issue Solved 2005-07-13

BiffTheAncient · June 16th, 2005, 10:44

OK.... I have consulted the Part List / Diagram and I see what you mean. I\m pretty sure that part 259 (1) is still where it should be as the the rear sight is still in place.

Does part 258 (2) have a flat spot or other feature that engages the end of the part 259? If it does I may have misaligned them causing part 259 to be loose and prone to flying out under heavy recoil.

Thanks

1. The grub screw under the rear sight.
2. The pin that hold in the fire selector switch.

June 16th, 2005, 10:44	#3
BiffTheAncient Trader rating Join Date: Feb 2005 Location: Toronto	OK.... I have consulted the Part List / Diagram and I see what you mean. I\m pretty sure that part 259 (1) is still where it should be as the the rear sight is still in place. Does part 258 (2) have a flat spot or other feature that engages the end of the part 259? If it does I may have misaligned them causing part 259 to be loose and prone to flying out under heavy recoil. Thanks 1. The grub screw under the rear sight. 2. The pin that hold in the fire selector switch. __________________ BiffTheAncient "Too many good docs are getting out of the business. Too many OB-GYNs aren't able to practice their love with women all across this country." —George W. Bush, Poplar Bluff, Mo., Sept. 6, 2004 "I'm Brick Tamland. People seem to like me because I am polite and I am rarely late. I like to eat ice cream and I really enjoy a nice pair of slacks. Years later, a doctor will tell me that I have an I.Q. of 48 and am what some people call mentally retarded." -Brick Tamland