500FPS VSR spring?

Skladfin · February 5th, 2009, 11:21

Hey guys,

Just bought a spring from this custom maker and it was advertised for 525FPS but shot 580FPS after it settled, so I'll have to buy a new spring.

I'm looking for an 11mm diametre spring(Prefreably Laylax) for VSR-10, but I'm not sure which one to get for an output of about 500FPS. Extensive search gave me results that weren't very consistent and thought I could hear some first hand experiences here.

Thanks.

gvanzeggelaar · February 5th, 2009, 13:08

you can just cut the spring down a wee bit a time. That way you can get it right where you want.

CDN_Stalker · February 5th, 2009, 13:19

11mm?!?! I've never even heard of that (except for AEG springs, they are 11mm ID), only 7mm and 9mm.

Get a Laylax PSS10 150SP spring (9mm ID), the first year I had it in my M24, with my bearing guide and tightbore, was getting 515fps out of it, and it's since settled down (and I'm talking MANY thousands of shots) I'm sitting around 490fps.

Skladfin · February 5th, 2009, 17:38

Quote:

Originally Posted by CDN_Stalker

11mm?!?! I've never even heard of that (except for AEG springs, they are 11mm ID), only 7mm and 9mm.

Get a Laylax PSS10 150SP spring (9mm ID), the first year I had it in my M24, with my bearing guide and tightbore, was getting 515fps out of it, and it's since settled down (and I'm talking MANY thousands of shots) I'm sitting around 490fps.

oops sorry I meant 11mm OD, so 9mm ID should be right.

I'll ty the 150SP, thanks man.

CDN_Stalker · February 5th, 2009, 19:55

Quote:

Originally Posted by Skladfin

oops sorry I meant 11mm OD, so 9mm ID should be right.

I'll ty the 150SP, thanks man.

Trust me, it rocks, easy to cock too. I've been using it full time in my Two-Four for the past 3 years....................

Skladfin · February 5th, 2009, 20:36

Quote:

Originally Posted by CDN_Stalker

Trust me, it rocks, easy to cock too. I've been using it full time in my Two-Four for the past 3 years....................

exactly what I was looking for, ordering now. Thanks man

CDN_Stalker · February 5th, 2009, 22:04

Stalker is your friend. Without the white van and candy offerings though.

FOX_111 · February 6th, 2009, 03:27

Quote:

Originally Posted by CDN_Stalker

Trust me, it rocks, easy to cock too. I've been using it full time in my Two-Four for the past 3 years....................

The two-four.... that's a badass way to call it.

Me: "I'm brigning the Mike Two-Four to the game!"

Grrr!!

That's a keeper!

Soon, it will also be the Lima Nine-Six!

Qc_le_big · February 21st, 2009, 13:42

wich type of bbs do you use with a 150sp?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 5th, 2009, 11:21	#1
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	500FPS VSR spring? Hey guys, Just bought a spring from this custom maker and it was advertised for 525FPS but shot 580FPS after it settled, so I'll have to buy a new spring. I'm looking for an 11mm diametre spring(Prefreably Laylax) for VSR-10, but I'm not sure which one to get for an output of about 500FPS. Extensive search gave me results that weren't very consistent and thought I could hear some first hand experiences here. Thanks.

February 5th, 2009, 13:19	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	11mm?!?! I've never even heard of that (except for AEG springs, they are 11mm ID), only 7mm and 9mm. Get a Laylax PSS10 150SP spring (9mm ID), the first year I had it in my M24, with my bearing guide and tightbore, was getting 515fps out of it, and it's since settled down (and I'm talking MANY thousands of shots) I'm sitting around 490fps. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 5th, 2009, 22:04	#7
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Stalker is your friend. Without the white van and candy offerings though. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 5th, 2009, 13:08	#2
gvanzeggelaar Trader rating Join Date: Oct 2007	you can just cut the spring down a wee bit a time. That way you can get it right where you want.

February 21st, 2009, 13:42	#9
Qc_le_big Trader rating Join Date: Feb 2009 Location: Montreal!	bbs wich type of bbs do you use with a 150sp?

500FPS VSR spring?

Upgrades & Modifications