|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 11th, 2010, 16:18
|
#1 |
|
The Costco Kid
|
TSD sd700 /vsr clone
Guys will a tsd sd700 be able to use this?
http://www.airsoftgi.com/product_inf...oducts_id=6342 I'm figuring I'll need this to make it work: http://www.airsoftgi.com/product_inf...oducts_id=6860 http://www.airsoftgi.com/product_inf...oducts_id=4643 I'm thinking it will but I've never changed out a barrel before. Thanks in advance. ALso If you know where I can get a 6.01 barrel in Canada for nearly the same price please let me know. |
|
|
|
October 11th, 2010, 19:03
|
#2 | |
|
It won't fit and not because it is too long, because the cuts are made for an other gun (namely the Maruzen APS2 Type 96 or any of it's clone).
At that price, you really should buy a Prometheus or if you want to save, get a Madbull barrel... From what I gather, theses "thighbore" are really cheap...
__________________
Quote:
|
|
|
|
|
|
October 12th, 2010, 13:18
|
#3 |
|
The Costco Kid
|
Ok well that clears that up.
change of plan; does this outer barrel fit the normal 430mm inner barrel? http://shop.ehobbyasia.com/accessori...al-tone-2.html |
|
|
|
|
October 12th, 2010, 14:21
|
#4 | |
|
|
It can house a 540mm tightbore barrel, but will also require a barrel cap (because the stock one won't fit)
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
