|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 31st, 2008, 09:28
|
#1 |
|
Banned
|
building a gun from scratch anyone do it
Has anyone ever build a gun from scratch it seems cool I sent 500 and got all systema internals and g and p and madbull stuff for externals..it looks sick..who else did it
|
|
|
|
January 31st, 2008, 10:53
|
#2 | |
|
Quote:
__________________
"A man should remember that he is not born solely for his own sake, but for his country, and for his family."   
|
|
|
|
|
|
January 31st, 2008, 11:02
|
#3 |
|
formerly Sepulcrum
|
lots of people have, I'm slowly acquiring parts to build myself an ak.
|
|
|
|
|
January 31st, 2008, 11:33
|
#4 |
|
Banned
|
The only thing is the rail systeme is off when I screw it in its off not straight down the miiddle with the sight thing
|
|
|
|
|
January 31st, 2008, 11:50
|
#5 |
|
you need shims to fix that
|
|
|
|
|
|
January 31st, 2008, 11:58
|
#6 |
|
Banned
|
What are shims?
Where do I get them? What do they do What do they look like Thanks....how do I put them on |
|
|
|
|
January 31st, 2008, 12:06
|
#7 | |
|
Actually, by the time I finish upgrading my TM-based C8A2 and CA M15 rifle, I will actually be only a couple of parts short of another Armalite AEG, so I may just take up that challenge.
Quote:
If you have to ask that question about something so basic and fundamental, perhaps building your own AEG without the personal guidance of someone experienced is a bad idea. But regardless, shims are tiny metal washers used to correctly space the gears in your gearbox.
__________________
|
|
|
|
|
|
January 31st, 2008, 12:22
|
#8 |
|
Banned
|
No its the rail system that won't go on snug to the threads it aint straight the rail like it don't line up with the sight and stuff..I can do the gearbox and stuff but the rail system where it bumps out so you can put you assesories on it aint straight with the sight and the top of the metal body...hope u understand sorry..I'm just not feeling to good if u can't read or understand
|
|
|
|
|
January 31st, 2008, 12:30
|
#9 |
|
You need some kind of washer/spacer to put between the rail system and your metal body so when you thread the front end on (however it works in your case) the spacer will shorten the 'threading distance'. You'll have to add/remove spacers until things thread on straight. I'm not sure where you can buy them but you can try to make them yourself. Some front end kits come with these spacers. Make sense?
|
|
|
|
|
January 31st, 2008, 12:30
|
#10 | |
|
Captain Awesome
|
ive built a few, cqb, and 2 m4's and also an m16 from scratch. i was building an ak but gave up after i couldnt find a hopup for it.
__________________
Age verifier southern Alberta  Quote:
|
|
|
|
|
|
January 31st, 2008, 12:58
|
#11 | |
|
Quote:
|
|
|
|
|
|
January 31st, 2008, 16:00
|
#12 |
|
Early G3 with real steel parts. Not CETME parts
 Mostly based off the CA M41 but will little original parts. 
__________________
|
|
|
|
|
February 1st, 2008, 07:55
|
#13 |
|
Banned
|
My m4 gun is sick I have the following things on it
M4 ics quick detach silencer Madbull long m203 G and p metal body Olympic arms rail system Sopmod stock Batter box Also what kinda battery can I use with a systema 120 gearbox and a magmum moter..like what battery should I get |
|
|
|
|
February 1st, 2008, 09:15
|
#14 | |
|
Tys
|
Quote:
sorry, I have no idea what I just wrote above...continuing on... Well, if your setup is wired to the rear and you have a sopmod/crane stock, you could put a crane battery (8.4v or 9.6v...get the largest MAH you can afford). You might need to do some fitting to the body to run the wires. If it's front wired and you're going to use the battery box, you'll have to find a battery that fits that box (not hard, but they come in different shapes and sizes so you've got to match it up). If your rail system has holes in the handguard you can feed the power wires through that way. Done well, that looks ok (not sure if it's sick enough for you). Done badly and it will look like ass. Hope that answers your question...not sure.. |
|
|
|
|
|
February 1st, 2008, 09:25
|
#15 |
|
Banned
|
I'm putting it on the front..it will look sick but I should get the largest battery power..I just have no clue what battery size is good..and if I get to powerful will it break the gearbox..but gun looks sick
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
