CYMA AKS-74U

Bob the Angry Potato · June 7th, 2008, 21:00

Quote:

Originally Posted by pusangani

ahhh ok yeah that kinda sux

Either way. I like having a stock but also like the ability to fold it in- if all else fails I'll leave it as is. My project right now is an M4 anyways.

pusangani · June 7th, 2008, 21:12

or go scopeless, ain't nothing wrong with aiming down the barrel, with that drum-mag you can afford to miss lol

maporms · July 18th, 2008, 11:02

You have a very solid Ak there Komrad Bob. Good choice!

J.Michael · September 14th, 2008, 00:21

Hello to everyone who had viewed this forum!

I just want to know if you guys know if wether a VFC wood handguard for AKS 74U will fit to the CYMA AKS 74U or not. Also is there any nice AKS 74 series hand grip with a dark brown color that will fit to the AKS 74U? Thanks.

TokyoSeven · September 14th, 2008, 05:47

Well the only advice I can offer in regards to that is that its wood, if it does not fit, it can be slowly made to fit if you are careful and paitent.

Donster · September 14th, 2008, 08:24

did it come stock with the tightbore, metal body and wood grip, or were those added on by yourself or a previous owner?

Skladfin · September 14th, 2008, 11:52

metal body and wood grip comes stock

tightbore doesnt

J.Michael · September 21st, 2008, 00:52

Hello to everyone!

I need help regarding the pin that connects to the front sight of the gun that locks the flashhider of AKS 74U. It started when I tried to take the flash hider apart from the gun. It was epoxied, I first scratched the epoxy and what I did next, was, I grabbed a screwdriver and hammer. I used the tip of the screwdriver to push down the pin a bit by hammering it downward. And what happened was that I ended up hammering it all the way down that the pin completely went through the hole. Not even a portion of it was exposed. Now I'm having trouble taking it out. It wasn't suppose to be that tight or could it be because of some of the left over epoxy that was squeezed in between the side of the pin and the space. Is there a tool made to remedy this problem? Do you guys know any method on how to take it apart? I tried to use a strong magnet but it didn't work.

Thanks in advance.

pusangani · September 21st, 2008, 13:34

maybe a few drops of a mild solvent or perhaps oil might loosen it up a bit

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 18th, 2008, 11:02	#78
maporms Trader rating Join Date: Jul 2008 Location: Manila, Philippines	You have a very solid Ak there Komrad Bob. Good choice! __________________ AK Addictus Pistolero Aspirant

September 14th, 2008, 00:21	#79
J.Michael Trader rating Join Date: Jun 2008 Location: Buranaby, BC	AKS 74U Wooden Hand Guard Hello to everyone who had viewed this forum! I just want to know if you guys know if wether a VFC wood handguard for AKS 74U will fit to the CYMA AKS 74U or not. Also is there any nice AKS 74 series hand grip with a dark brown color that will fit to the AKS 74U? Thanks.

September 14th, 2008, 05:47	#80
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Well the only advice I can offer in regards to that is that its wood, if it does not fit, it can be slowly made to fit if you are careful and paitent. __________________ "Its only a little bit on fire"

June 7th, 2008, 21:12	#77
pusangani Official ASC "Dumb Ass" Trader rating Join Date: Jan 2008 Location: Scarbrah, Ontario	or go scopeless, ain't nothing wrong with aiming down the barrel, with that drum-mag you can afford to miss lol

September 14th, 2008, 08:24	#81
Donster Trader rating Join Date: Jul 2007 Location: GTA	did it come stock with the tightbore, metal body and wood grip, or were those added on by yourself or a previous owner?

September 14th, 2008, 11:52	#82
Skladfin Trader rating Join Date: Dec 2006 Location: Glace Bay, Nova Scotia	metal body and wood grip comes stock tightbore doesnt

September 21st, 2008, 00:52	#83
J.Michael Trader rating Join Date: Jun 2008 Location: Buranaby, BC	Need help so bad :( Hello to everyone! I need help regarding the pin that connects to the front sight of the gun that locks the flashhider of AKS 74U. It started when I tried to take the flash hider apart from the gun. It was epoxied, I first scratched the epoxy and what I did next, was, I grabbed a screwdriver and hammer. I used the tip of the screwdriver to push down the pin a bit by hammering it downward. And what happened was that I ended up hammering it all the way down that the pin completely went through the hole. Not even a portion of it was exposed. Now I'm having trouble taking it out. It wasn't suppose to be that tight or could it be because of some of the left over epoxy that was squeezed in between the side of the pin and the space. Is there a tool made to remedy this problem? Do you guys know any method on how to take it apart? I tried to use a strong magnet but it didn't work. Thanks in advance.

September 21st, 2008, 13:34	#84
pusangani Official ASC "Dumb Ass" Trader rating Join Date: Jan 2008 Location: Scarbrah, Ontario	maybe a few drops of a mild solvent or perhaps oil might loosen it up a bit

CYMA AKS-74U

Reviews