|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 26th, 2013, 12:32
|
#16 |
|
My stock TM PX4 has been running great no issues what so ever. There are lots of after market PX4 slides although they will cost you in the area of $250-$350. Take a look at WGC and ehobby. Also is your PX4 the cansoft version?
__________________
"Strength and Honour, Faith and Fury. In these four principles is Life defined and Victory achieved." https://www.facebook.com/pages/Bad-K...8&ref=bookmark |
|
|
|
February 26th, 2013, 15:03
|
#17 |
|
TM for $23:
http://shop.ehobbyasia.com/tokyo-mar...r-px4-gbb.html or metal for $76, or black metal for $60: http://shop.ehobbyasia.com/3px4-comp...bb-silver.html
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
February 26th, 2013, 16:28
|
#18 |
|
How much sand CAN you fit in your vagina!?
|
I believe you can still get the RA-Tech one directly from them. It's not necessary, but I can damn near guarantee it'll be the nicest.
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection... |
|
|
|
|
February 26th, 2013, 17:00
|
#19 |
|
Yes styrak. Not in stock is irrelevant though.
|
|
|
|
|
February 26th, 2013, 18:03
|
#20 |
|
Well I'm no pro or anything but where the decocker (sorry for poor terminology) when you slide it down it the little nub that contacts the part where you pull the trigger just slides over it instead of dropping the hammer... Safety still works which is good but when I put the gun on safe I am still able to cock the hammer but when I push down on the slide on the top the decocker is able to hit the part that drops the hammer ..its a simple fix ..but this gun has been breaking by itself ...and yes its the one that is made for Canada the clear receiver
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
