Diemaco C8SFW/L119A1 [Work in Progress]

Mr Jon · February 16th, 2009, 20:35

Here's my current project, it's supposed to be a Diemaco L119A1 but I was unable to source a correctly trademarked body but instead chose the G&P Canada Type body as a close substitute. It was only loosely put together just for fitting and is non operational at the moment but it looks the part!

Parts:
G&P Steel Flash Hider
G&P Canada Type Body
G&P M4A1 Stock with Guarder Buttpad
Guarder Lone Star Ordnance Large AR Grip
Army Code Steel L119A1 Front Site Block
Huang Steel Diemaco SFW Barrel
Huang Elcan
JG Complete M130 Systema Mechbox Clone
Dboys RIS
Star Thermold Mag

BloodSport · February 16th, 2009, 20:40

Looking good MuffinMan (hee hee oldskool name).

Have you thought about maybe getting a non trade marked body and sending it to that guy in Toronto who laser etches trademarks and such on to the bodies and frames?

Oh and when are you coming to visit with your cameras to take some sexy pics of my guns? That and to drink a few gallons of beer?

Mr Jon · February 16th, 2009, 20:41

Dude my previous username was not MuffinMan LOL.
Oh you can guarentee if im heading out your way im gonna harass you.... unless you come out here first!!

BloodSport · February 16th, 2009, 20:42

Doh sorry Phrozen lol

jesster202 · February 16th, 2009, 20:55

is it wired to the front?

Mr Jon · February 16th, 2009, 20:56

sure is, battery will go to a PEQ

Rifleman90P · February 16th, 2009, 21:04

That's one hell of a sharp lookin Rifle Bud!!

It's been a long time since Canada used the thermal mold magazines though (mid to late nineties if memory serves). Good god I was happy to see those things go, those things were forever shattering and bullets scattering all over the place.

Canada has since switched to the standard metal magazines, an example of which you can see here.

Again nice rifle Bud!!

Cheers !!

Brian

Lerch · February 16th, 2009, 21:29

I like it, alot further then I ever got on my builds...

The only things I'd suggest are;
-Sling loop under the front sight
-KA rail covers on unused sides, perhaps a KA vertical grip
-ACOG TA01 (either irons on top or DR sight)
-Charging handle?
-Dual sling loops behind the receiver

You could consider it a Diemaco C8SFW and not need to worry about the metal body too

Aquamarine · February 16th, 2009, 21:31

HOT!!!

Mr Jon · February 16th, 2009, 22:25

KA side panels I already have, just not installed, KA vert also have, I however can't seem to locate a place to buy a friggin front site sling loop! Charging handle hasnt been installed yet as its WIP. Wait till you see my C7 project Lerch

That one is going to be a couple months a way yet.

Shirley · February 16th, 2009, 22:50

Oh hot damn!!
Is your gearbox the one with the mosfet?

Mr Jon · February 16th, 2009, 22:51

sure is, just got the mech in the mail today fresh from the Asias!

Captain Tenneal · February 16th, 2009, 22:55

Well ya got me and him mixed up

Still a nice gun.

THIS MEAN YOU'RE COMING OUT TO PLAY RIGHT?!

Shirley · February 16th, 2009, 22:56

Quote:

Originally Posted by Mr Jon

sure is, just got the mech in the mail today fresh from the Asias!

Huang didn't have any? lol
Sweet though. A 1000$ gun there.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 16th, 2009, 20:35	#1
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	Diemaco C8SFW/L119A1 [Work in Progress] Here's my current project, it's supposed to be a Diemaco L119A1 but I was unable to source a correctly trademarked body but instead chose the G&P Canada Type body as a close substitute. It was only loosely put together just for fitting and is non operational at the moment but it looks the part! Parts: G&P Steel Flash Hider G&P Canada Type Body G&P M4A1 Stock with Guarder Buttpad Guarder Lone Star Ordnance Large AR Grip Army Code Steel L119A1 Front Site Block Huang Steel Diemaco SFW Barrel Huang Elcan JG Complete M130 Systema Mechbox Clone Dboys RIS Star Thermold Mag __________________ Last edited by Mr Jon; August 10th, 2009 at 21:55..

February 16th, 2009, 20:40	#2
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	Looking good MuffinMan (hee hee oldskool name). Have you thought about maybe getting a non trade marked body and sending it to that guy in Toronto who laser etches trademarks and such on to the bodies and frames? Oh and when are you coming to visit with your cameras to take some sexy pics of my guns? That and to drink a few gallons of beer? __________________ Saskatchewan Age Verifier! Contact for more Info.

February 16th, 2009, 20:41	#3
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	Dude my previous username was not MuffinMan LOL. Oh you can guarentee if im heading out your way im gonna harass you.... unless you come out here first!! __________________

February 16th, 2009, 20:42	#4
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	Doh sorry Phrozen lol __________________ Saskatchewan Age Verifier! Contact for more Info.

February 16th, 2009, 20:55	#5
jesster202 Trader rating Join Date: Dec 2007 Location: London Ontario	is it wired to the front? __________________ *MY COLLECTION* *AEG* M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW *GAS/SPRING* KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11 *GEAR* Coyote Brown CIRAS

February 16th, 2009, 20:56	#6
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	sure is, battery will go to a PEQ __________________

February 16th, 2009, 21:04	#7
Rifleman90P Trader rating Join Date: Feb 2008 Location: Winnipeg	That's one hell of a sharp lookin Rifle Bud!! It's been a long time since Canada used the thermal mold magazines though (mid to late nineties if memory serves). Good god I was happy to see those things go, those things were forever shattering and bullets scattering all over the place. Canada has since switched to the standard metal magazines, an example of which you can see here. Again nice rifle Bud!! Cheers !! Brian __________________

February 16th, 2009, 21:29	#8
Lerch * AV Status REVOKED * Trader rating Join Date: Feb 2003 Location: CFB Shilo, MB	I like it, alot further then I ever got on my builds... The only things I'd suggest are; -Sling loop under the front sight -KA rail covers on unused sides, perhaps a KA vertical grip -ACOG TA01 (either irons on top or DR sight) -Charging handle? -Dual sling loops behind the receiver You could consider it a Diemaco C8SFW and not need to worry about the metal body too __________________

February 16th, 2009, 21:31	#9
Aquamarine PanSexual Trader rating Join Date: Oct 2002 Location: Asakusa, Japan	HOT!!! __________________

February 16th, 2009, 22:25	#10
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	KA side panels I already have, just not installed, KA vert also have, I however can't seem to locate a place to buy a friggin front site sling loop! Charging handle hasnt been installed yet as its WIP. Wait till you see my C7 project Lerch That one is going to be a couple months a way yet. __________________

February 16th, 2009, 22:50	#11
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Oh hot damn!! Is your gearbox the one with the mosfet? __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

February 16th, 2009, 22:51	#12
Mr Jon Trailer Park Supervisor Trader rating Join Date: Jul 2003 Location: Winnipeg MB	sure is, just got the mech in the mail today fresh from the Asias! __________________

February 16th, 2009, 22:55	#13
Captain Tenneal Formerly Muffinman Trader rating Join Date: Sep 2003 Location: Winnipeg, Manitoba	Well ya got me and him mixed up Still a nice gun. THIS MEAN YOU'RE COMING OUT TO PLAY RIGHT?! __________________

Diemaco C8SFW/L119A1 [Work in Progress]

Showcase