we hi capa see post on page 2 please

Dart · August 15th, 2010, 23:16

... man I need to stop owning gas anything lol.

Ok I had a broken loading nozzle on my we hi capa so I replaced it with a matrix loading nozzle. while I was in there I noticed the hop up was really oddly positioned, took it out and it was really super soft. So I have replaced it.

Now with the new loading nozzle in and the hop up installed when I go to fire the gun and it just vents the whole mag. The slide barely moves back.

Where should I be looking to fix this? the disconnect is working *I push down on it and it pulls the knocker back in, i think the issue is the slide is not coming back to hit the nub so it just keeps venting gas.*

Slono · August 15th, 2010, 23:17

Did you remember to put the internals of the old loading nozzle into the new matrix one?

Dart · August 15th, 2010, 23:33

umm... this is why working on guns after 36 hours of being awake is not a good idea... your right *facepalm*

how does this go in I took it apart and didn't think to look at how it came out.

Dart · August 16th, 2010, 00:06

alright I got it to cycle. But the BB is not firing out it just kind of dribbles out of the barrel. hop up is completely off.

Does the internals of the loading muzzle go Spring, nozzle, retainer?

juicy · August 16th, 2010, 01:38

Are you missing a screw that goes through top of loading muzzle into hole in "retainer" (valve blocker)?

Dart · August 17th, 2010, 00:39

nope thats in there. thinking maybe the air chamber needs to break in or something. Should I try a few drops of oil to get BB's moving through it?

Diabolic Tyrant · August 17th, 2010, 00:46

Its a WE? Well theres your problem!

Dart · August 17th, 2010, 02:53

Quote:

Originally Posted by Diabolic Tyrant

Its a WE? Well theres your problem!

helpful.

juicy · August 17th, 2010, 17:37

Quote:

Originally Posted by Dart

nope thats in there. thinking maybe the air chamber needs to break in or something. Should I try a few drops of oil to get BB's moving through it?

Don't do that, whatever you do. You said your hop up is off right? Turn it on and see what happens. Sounds to me like the hop up rubber isn't retaining BB's correctly... Try chambering a round and then pointing the muzzle at the floor. If a BB rolls out because of gravity, well that'd be the issue of not having any hop up set.

Dart · August 17th, 2010, 19:59

no the BB doesn't roll out, it sits right in the area of the hop up... its like not enough gas is being used during the firing process of the shot.

zone 69 · August 18th, 2010, 08:35

Well like someOne said it's a WE.
If you can't get it to work bring it by my place with all the stock peace's and leave it with me and ill see if I can fix it for you.

Dart · August 18th, 2010, 09:13

i may just do that, either you or ktown. I went to test fire it the other day and the fill valve was leaking so its soaking in silli oil right now.

StrikeFreedom · August 18th, 2010, 11:36

So the gun cycles but no BB comes out? Then perhaps the rocket valve is stuck in the forward position?

Thenooblord · August 18th, 2010, 11:53

Is it a white nozzle? The valves in those get stuck, use the stock valve

Dart · August 18th, 2010, 16:39

Quote:

Originally Posted by Thenooblord

Is it a white nozzle? The valves in those get stuck, use the stock valve

no its a matrix loading muzzle....

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 15th, 2010, 23:16	#1
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	we hi capa see post on page 2 please ... man I need to stop owning gas anything lol. Ok I had a broken loading nozzle on my we hi capa so I replaced it with a matrix loading nozzle. while I was in there I noticed the hop up was really oddly positioned, took it out and it was really super soft. So I have replaced it. Now with the new loading nozzle in and the hop up installed when I go to fire the gun and it just vents the whole mag. The slide barely moves back. Where should I be looking to fix this? the disconnect is working I push down on it and it pulls the knocker back in, i think the issue is the slide is not coming back to hit the nub so it just keeps venting gas. Last edited by Dart; August 21st, 2010 at 21:22..

August 15th, 2010, 23:17	#2
Slono Slow mo. Trader rating Join Date: Aug 2009 Location: GTA	Did you remember to put the internals of the old loading nozzle into the new matrix one? __________________ The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands at times of challenge and controversy. - Martin Luther King, Jr.

August 18th, 2010, 08:35	#11
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	Well like someOne said it's a WE. If you can't get it to work bring it by my place with all the stock peace's and leave it with me and ill see if I can fix it for you. Last edited by zone 69; August 18th, 2010 at 08:38..

August 15th, 2010, 23:33	#3
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	umm... this is why working on guns after 36 hours of being awake is not a good idea... your right facepalm how does this go in I took it apart and didn't think to look at how it came out.

August 16th, 2010, 00:06	#4
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	alright I got it to cycle. But the BB is not firing out it just kind of dribbles out of the barrel. hop up is completely off. Does the internals of the loading muzzle go Spring, nozzle, retainer?

August 16th, 2010, 01:38	#5
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	Are you missing a screw that goes through top of loading muzzle into hole in "retainer" (valve blocker)?

August 17th, 2010, 00:39	#6
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	nope thats in there. thinking maybe the air chamber needs to break in or something. Should I try a few drops of oil to get BB's moving through it?

August 17th, 2010, 00:46	#7
Diabolic Tyrant Banned Trader rating Join Date: Feb 2007	Its a WE? Well theres your problem!

August 17th, 2010, 19:59	#10
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	no the BB doesn't roll out, it sits right in the area of the hop up... its like not enough gas is being used during the firing process of the shot.

August 18th, 2010, 09:13	#12
Dart Trader rating Join Date: Apr 2009 Location: Grande Prairie Alberta	i may just do that, either you or ktown. I went to test fire it the other day and the fill valve was leaking so its soaking in silli oil right now.

August 18th, 2010, 11:36	#13
StrikeFreedom Trader rating Join Date: Aug 2006 Location: Markham	So the gun cycles but no BB comes out? Then perhaps the rocket valve is stuck in the forward position?

we hi capa see post on page 2 please

Doctor's Corner