WE 1911 MEU - Slide not locking back

[KBarlow]

Thanks man. Was looking all over. Capital Airsoft's site is down and has been for a couple days now. Can't complain with $4.17 including shipping.

To answer the other questions, the part that pushed the slide catch was snapped off completely. It needs to be replaced.

Originally Posted by jordan7831

So the follower was worn down so it wouldnt push the slide lock upwards is that correct? If so you can if your up to it superglue some plastic to it to get it working again. Oh check out tiger111hk, as they have oem we parts for dirt cheap.

Babam. $2.50 for a follower? Eh not to bad.

http://airsoft.tiger111hk.com/Airsof...duct_info.html

[jordan7831]

Your welcome. Glad to be of service. Might be a good idea to pick up some other little parts while your there. Hop up rubber and piston isnt a bad idea.

[KBarlow]

Glued a piece of plastic in place as a stop-gap, cuz the follower was poking out of the mag too far and the blowback unit was hitting it when the slide went forward. It actually works.