The real cost of Canadian 0.2g bbs

XtenZ · September 9th, 2009, 15:44

I guess this would be off topic, but following a sub-topic within the thread.

Well, I must say I have only shot about 1000 rounds and have already found a *Brain. It was a lucky find as it was the last BB to into a mag from a speed loader. I have a pic of mine that I will pop up later.

Am I to understand that damage could happen because of *Brains? to rip the hop-up bucking, dust up the hop-up or barrel?

I wonder if MetalTech extends the same *Warranty for *Brains. I doubt I would reach out for the offer as I know that manufacturing process of such small items cannot be perfect and that these annomolies will happen. I got me an albino chipmunk brain.

I am looking forward to when BB Bastards are available and picking up a few bags. I have been buying MetalTech .25g @ $0.0067 per BB and BB Bastards look to be $0.005 per BB from ASC, before shipping. Is there anybody on the West Coast/Vancouver that is a distributor or BB Bastards?

Scarecrow · September 28th, 2009, 08:45

Brains are generally surface imperfection only and are always slightly smaller in diameter than a regular BB, so there is little to no chance for it to mess up your feedpath or gun. I just got the two from Spawn28 and one of them is about 40% brainy and the other one has some dark streaks and is borderline brain - I'm honoring both of them with free bags of course but neither one of these would damage a gun - if you shot 5000 of them all at once? Yeah, you'd probably chop a little and need to clean your gun, but, it would have to be seriously brainy (80% all around perhaps) and they happen so rarely there is little chance of that.

Congrats to Spawn28.

Brain BBs are pretty much unique I think due to BB Bastards manufacturing process. I've never heard of any other brand having them.

baker_Jeff · September 28th, 2009, 10:30

I have a BBB brain sitting on my desk... it's too cool to send in! :P

I've been hanging on to the thing for almost 2 years lol.

Scarecrow · September 28th, 2009, 10:43

Quote:

Originally Posted by baker_Jeff

I have a BBB brain sitting on my desk... it's too cool to send in! :P

I've been hanging on to the thing for almost 2 years lol.

LOL, thats most everyone's reaction. I want to get a really good one with 360 degrees of brain and then encase it in clear resin and put it on my desk. I even asked my manufacturer if they could make me one, and they couldn't. They really are one of a kind...

Mitchell12 · September 28th, 2009, 11:23

Nothing wrong with Bastards but during one of the shortages I got some Madbulls and they've worked great in everything I have so I haven't had to buy anything else since.

R.I.T.Z · September 28th, 2009, 11:30

Got Age verified by J
I use BB's from J
I will not accept any substitutes.

BB Bastard for life !

Ktown Militia · September 28th, 2009, 12:13

I've tried a variety of brands, and have only really stuck with metal tech bb's. BB bastard just doesnt have good consistency when it comes down to it. Plus the price and deals that MT has, you cant beat em.

Outcast569 · September 28th, 2009, 12:56

Bought some MT off Amos back at Claybank and never again will I use them with a tight bore. Too random for my vsr's 6.01. BBbastards are the only brand that go threw it without jamming every so often. The only time I use the MT is in the grenades to use them up lol.

Donster · September 28th, 2009, 13:03

Quote:

Originally Posted by Outcast569

Bought some MT off Amos back at Claybank and never again will I use them with a tight bore. Too random for my vsr's 6.01. BBbastards are the only brand that go threw it without jamming every so often. The only time I use the MT is in the grenades to use them up lol.

i guess that speaks for itself.

Amos · September 28th, 2009, 13:58

Quote:

Originally Posted by Outcast569

Bought some MT off Amos back at Claybank and never again will I use them with a tight bore. Too random for my vsr's 6.01. BBbastards are the only brand that go threw it without jamming every so often. The only time I use the MT is in the grenades to use them up lol.

Yea.. ALOT of people were having trouble with the MT BB's... It's a shame that their customer service and everything is so great while their product is so poor.

Although I don't 100% blame the jamming problems people were having on MT BB's.. the environment was SUPER dusty and I know that was causing a couple problems for a few people (I cleaned their barrel and they didn't have anymore problems with the MT BB's)

But... Yea, I sadly wont be selling MT BB's anymore

I need a product that works 100% of the time... ALL the time!

Ktown Militia · September 28th, 2009, 14:18

Quote:

Originally Posted by Amos

Yea.. ALOT of people were having trouble with the MT BB's... It's a shame that their customer service and everything is so great while their product is so poor.

Although I don't 100% blame the jamming problems people were having on MT BB's.. the environment was SUPER dusty and I know that was causing a couple problems for a few people (I cleaned their barrel and they didn't have anymore problems with the MT BB's)

But... Yea, I sadly wont be selling MT BB's anymore

I need a product that works 100% of the time... ALL the time!

Really? I havnt heard of anyone having issues out here with MT bbs. Bummer to hear!!!!

Outcast569 · September 28th, 2009, 14:19

Quote:

Originally Posted by Amos

Yea.. ALOT of people were having trouble with the MT BB's... It's a shame that their customer service and everything is so great while their product is so poor.

Although I don't 100% blame the jamming problems people were having on MT BB's.. the environment was SUPER dusty and I know that was causing a couple problems for a few people (I cleaned their barrel and they didn't have anymore problems with the MT BB's)

But... Yea, I sadly wont be selling MT BB's anymore

I need a product that works 100% of the time... ALL the time!

No worries at all man. The MT's run great threw my MP5 and tornado its only a friends P90 and my VSR-10 both with 6.01-6.02. The only time I have issues with them is when I have any thing with a tightbore on it. Other then that they work well enough for stock guns by all means. I use them when we rent out guns and give out ammo.

Amos · September 28th, 2009, 15:12

Quote:

Originally Posted by Outcast569

No worries at all man. The MT's run great threw my MP5 and tornado its only a friends P90 and my VSR-10 both with 6.01-6.02. The only time I have issues with them is when I have any thing with a tightbore on it. Other then that they work well enough for stock guns by all means. I use them when we rent out guns and give out ammo.

How often and what cleaning process do you use for your VSR?

I was firing them just fine through my PDI 6.01 in my VSR...

shinobii · September 28th, 2009, 15:44

The biovals were designed with tight bores in mind. chopping and jamming are drastically reduced.

Quote:

Originally Posted by Outcast569

Bought some MT off Amos back at Claybank and never again will I use them with a tight bore. Too random for my vsr's 6.01. BBbastards are the only brand that go threw it without jamming every so often. The only time I use the MT is in the grenades to use them up lol.

gmds44 · September 28th, 2009, 15:57

it's funny how the subject of this thread changed so dramatically.

As for me, I say BB bastards are the way to go, except when the whole country doesn't have 1 single bag in stock. :-(

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 28th, 2009, 08:45	#47
Scarecrow A Total Bastard Trader rating Join Date: May 2003 Location: Tottenham	Brains are generally surface imperfection only and are always slightly smaller in diameter than a regular BB, so there is little to no chance for it to mess up your feedpath or gun. I just got the two from Spawn28 and one of them is about 40% brainy and the other one has some dark streaks and is borderline brain - I'm honoring both of them with free bags of course but neither one of these would damage a gun - if you shot 5000 of them all at once? Yeah, you'd probably chop a little and need to clean your gun, but, it would have to be seriously brainy (80% all around perhaps) and they happen so rarely there is little chance of that. Congrats to Spawn28. Brain BBs are pretty much unique I think due to BB Bastards manufacturing process. I've never heard of any other brand having them. __________________ LIKE us on Facebook!!

September 28th, 2009, 10:30	#48
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	I have a BBB brain sitting on my desk... it's too cool to send in! :P I've been hanging on to the thing for almost 2 years lol. __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

September 28th, 2009, 12:13	#52
Ktown Militia Trader rating Join Date: Mar 2008 Location: Kelowna BC	I've tried a variety of brands, and have only really stuck with metal tech bb's. BB bastard just doesnt have good consistency when it comes down to it. Plus the price and deals that MT has, you cant beat em. __________________

September 9th, 2009, 15:44	#46
XtenZ Trader rating Join Date: Sep 2008 Location: South Surrey, B.C.	I guess this would be off topic, but following a sub-topic within the thread. Well, I must say I have only shot about 1000 rounds and have already found a Brain. It was a lucky find as it was the last BB to into a mag from a speed loader. I have a pic of mine that I will pop up later. Am I to understand that damage could happen because of Brains? to rip the hop-up bucking, dust up the hop-up or barrel? I wonder if MetalTech extends the same Warranty for Brains. I doubt I would reach out for the offer as I know that manufacturing process of such small items cannot be perfect and that these annomolies will happen. I got me an albino chipmunk brain. I am looking forward to when BB Bastards are available and picking up a few bags. I have been buying MetalTech .25g @ $0.0067 per BB and BB Bastards look to be $0.005 per BB from ASC, before shipping. Is there anybody on the West Coast/Vancouver that is a distributor or BB Bastards?

September 28th, 2009, 11:30	#51
R.I.T.Z Crackers Trader rating Join Date: Mar 2009 Location: The Shwa	Got Age verified by J I use BB's from J I will not accept any substitutes. BB Bastard for life !

September 28th, 2009, 12:56	#53
Outcast569 Trader rating Join Date: Oct 2007 Location: Calgary, Alberta	Bought some MT off Amos back at Claybank and never again will I use them with a tight bore. Too random for my vsr's 6.01. BBbastards are the only brand that go threw it without jamming every so often. The only time I use the MT is in the grenades to use them up lol. __________________

September 28th, 2009, 15:57	#60
gmds44 Trader rating Join Date: Apr 2008 Location: Montreal, Canada	it's funny how the subject of this thread changed so dramatically. As for me, I say BB bastards are the way to go, except when the whole country doesn't have 1 single bag in stock. :-(

The real cost of Canadian 0.2g bbs

General