printable english tm m4 instructions?

buzzard · June 3rd, 2005, 22:59

i just got my TM m4a1 and as its my first aeg i dont really got a clue. is there anywhere i can find a printable instruction/owners/maintenance manual in english?

Sgt_Lynch · June 3rd, 2005, 23:25

It's not too difficult.
Charge Battery
Plug in Battery
Load Mag
Shoot
Clean Barrel once in a while..

GMTII · June 3rd, 2005, 23:36

Like sgt_lynch said, It's not really hard just look at the japanese instructions and kinda go by that.(There's lots of interesting pics in the manual) It took me a few days to get used to my first aeg but you will get to know it. I still remember, when I thought the hopup was the cocking lever on my mp5....ahh the memories of my first aeg.

Erik

Drake · June 4th, 2005, 02:42

All the important stuff is subtitled in English anyway, only the fluff is in Japanese only. In my manual anyway.

Unless you didn't get a manual at all. If thats the case, I might be persuaded to scan mine for you. But you'd have to put something to the effect that I'm your greatest hero in your signature or something. (j/k)

buzzard · June 4th, 2005, 09:29

i must not have gotten the manual. i got a catalogue and a couple of warning sheets ie:dont aim at face, but nothing that tells me what all the buttons are for. at the next game im sure ill have all my questions answered , but for now i dont know what the t-handle cocking lever does, or the black button on the right side, etc.
drake you are my greatest hero...ever.....i mean it

Verthos · June 4th, 2005, 09:45

well the t-cocking handle releases the dust cove and reveals the hopup within the chamber, and the button on the right side...i presume you mean the mag release button....which does just that, releases the magazine. Hope that helps ^.^,

Steve

buzzard · June 4th, 2005, 10:16

tnx verthos, i know about the mag release button that you normally use your index finger for, i was talking about the thumb button; up and back further from that one

SKI · June 4th, 2005, 10:25

That black button is just for show. It does nothing except move in and out. In real steel, it's the forward assist nob.

buzzard · June 4th, 2005, 10:45

ahh..... ty ski

Malinak · June 4th, 2005, 14:08

M4 manual can be found here:
http://www.airsoftplayers.com/manuals.asp
Though little of it is in English, the diagrams should do you just fine.
Any particlar questions not addressed by the manual, feel free to search the board for your answers. If you still havent found what you need after searching, go ahead and post and there are many people who can help you out.

buzzard · June 4th, 2005, 15:45

yea i found that one, tnx malinak, thats a shop or service manual which i printed off; but i was hoping to find a basic users/instruction manual too.

Drake · June 4th, 2005, 18:47

here

http://tacticalmoose.com/for%20buzza...1%20manual.PDF

thank Canon for making really fast scanners

Drake · June 4th, 2005, 18:55

here

http://tacticalmoose.com/for%20buzza...1%20manual.zip

I put it in a zip file since the PDF wouldn't open properly in browsers for some reason, but seems to open fine in Acrobat Reader 7... go figure.

Thank Canon for making really fast scanners. heh

buzzard · June 4th, 2005, 20:31

thanks a lot dude

Raymondo · June 7th, 2005, 03:18

what exactly does a foreward assist knob do anyways?

Does it push the round into the chamber or something?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 3rd, 2005, 22:59	#1
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	printable english tm m4 instructions? i just got my TM m4a1 and as its my first aeg i dont really got a clue. is there anywhere i can find a printable instruction/owners/maintenance manual in english?

June 3rd, 2005, 23:25	#2
Sgt_Lynch Trader rating Join Date: Dec 2001 Location: Anger Management class.	It's not too difficult. Charge Battery Plug in Battery Load Mag Shoot Clean Barrel once in a while.. __________________ When the going gets tough... the tough go cyclic.

June 3rd, 2005, 23:36	#3
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	Like sgt_lynch said, It's not really hard just look at the japanese instructions and kinda go by that.(There's lots of interesting pics in the manual) It took me a few days to get used to my first aeg but you will get to know it. I still remember, when I thought the hopup was the cocking lever on my mp5....ahh the memories of my first aeg. Erik __________________ I can't measure my sig so I got this stupid tag line instead.

June 4th, 2005, 02:42	#4
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	All the important stuff is subtitled in English anyway, only the fluff is in Japanese only. In my manual anyway. Unless you didn't get a manual at all. If thats the case, I might be persuaded to scan mine for you. But you'd have to put something to the effect that I'm your greatest hero in your signature or something. (j/k) __________________

June 4th, 2005, 09:29	#5
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	i must not have gotten the manual. i got a catalogue and a couple of warning sheets ie:dont aim at face, but nothing that tells me what all the buttons are for. at the next game im sure ill have all my questions answered , but for now i dont know what the t-handle cocking lever does, or the black button on the right side, etc. drake you are my greatest hero...ever.....i mean it

June 4th, 2005, 09:45	#6
Verthos Trader rating Join Date: Jun 2004 Location: Mississauga	well the t-cocking handle releases the dust cove and reveals the hopup within the chamber, and the button on the right side...i presume you mean the mag release button....which does just that, releases the magazine. Hope that helps ^.^, Steve

June 4th, 2005, 10:16	#7
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	tnx verthos, i know about the mag release button that you normally use your index finger for, i was talking about the thumb button; up and back further from that one

June 4th, 2005, 10:25	#8
SKI Trader rating Join Date: Oct 2002 Location: Mississauga	That black button is just for show. It does nothing except move in and out. In real steel, it's the forward assist nob. __________________ www.ctmotorsports.ca

June 4th, 2005, 10:45	#9
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	ahh..... ty ski

June 4th, 2005, 14:08	#10
Malinak Trader rating Join Date: Dec 2001 Location: Kitchener	M4 manual can be found here: http://www.airsoftplayers.com/manuals.asp Though little of it is in English, the diagrams should do you just fine. Any particlar questions not addressed by the manual, feel free to search the board for your answers. If you still havent found what you need after searching, go ahead and post and there are many people who can help you out. __________________ Do you have any MP5 accessories that you're looking to get rid of just let me know.

June 4th, 2005, 15:45	#11
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	yea i found that one, tnx malinak, thats a shop or service manual which i printed off; but i was hoping to find a basic users/instruction manual too.

June 4th, 2005, 18:47	#12
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	here http://tacticalmoose.com/for%20buzza...1%20manual.PDF thank Canon for making really fast scanners __________________

June 4th, 2005, 18:55	#13
Drake E-01 Trader rating Join Date: Dec 2001 Location: Montreal, QC	here http://tacticalmoose.com/for%20buzza...1%20manual.zip I put it in a zip file since the PDF wouldn't open properly in browsers for some reason, but seems to open fine in Acrobat Reader 7... go figure. Thank Canon for making really fast scanners. heh __________________

June 4th, 2005, 20:31	#14
buzzard Trader rating Join Date: Apr 2005 Location: dartmouth ns	thanks a lot dude

June 7th, 2005, 03:18	#15
Raymondo Trader rating Join Date: Oct 2003 Location: Calgary Alberta	what exactly does a foreward assist knob do anyways? Does it push the round into the chamber or something?

printable english tm m4 instructions?

General