DIY HUTU for CA P90 Proline (Hop Up Tracer Unit) in Toronto

PrIeSt · November 15th, 2011, 19:07

I tried the p90 on the motor. An single did not light.

I'm trying a new arrangement and may try it again. So far they don't get enough light

sabinn · November 15th, 2011, 20:04

Just for the sake of argument and theorycrafting... Would it be possible to mount a laser as the light source? Do they make a shallow enough emitter?

In theory this would give a maximum amount of "charging" to the tracer round in the smallest amount of time. This would be akin to a flash/photocell like the TM supressors employ (as far as charging the bb goes). Only a laser would have the benefit of minimum light bleed from the chamber. Unlike omni directional light sources like LEDS.

This is just me thinking out loud. I have no electrical experience. Possible?

PrIeSt · November 15th, 2011, 21:17

Well it would suck battery life. And most places wouldn't have the space.

LEDs direct all there light into the chamber. Not exactly a light bulb. More along the lines of mini flash lights

Dynamo · November 15th, 2011, 21:22

a UV laser would be needed. they are dangerous, costly (compared to LED) and bulky.

Dynamo · December 21st, 2011, 01:41

ok time for an update on sabinn's P90

i have completed all the work and everything is working perfectly. though i was not able to run the LEDs off the motor leads due to a gearbox issue that may need to be addressed at a later time by sabinn. i wont go into details about the issues found in the gearbox as the HUTU is what's being discussed here. though it did eat up some time with trouble shooting.

i realize that it has been a while since this thread was last updated, and that i have been working on and off sabinn's P90 for a few weeks. i have been working back and forth from Whitby to Toronto for the last 3 weeks and sabinn took a week trip to Alberta on business and to look into his gearbox issues personally. so technically it maybe took me 3-4 days including trouble shooting to complete this mod.

now that everything is done and working, i'm going to start a new thread with a detailed step-by-step on what i did and how, along with detailed pictures and parts used.

sabinn · April 11th, 2012, 02:05

project pics @ http://airsoftcanada.com/showthread.php?t=134179

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 15th, 2011, 19:07	#16
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	I tried the p90 on the motor. An single did not light. I'm trying a new arrangement and may try it again. So far they don't get enough light __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

November 15th, 2011, 21:17	#18
PrIeSt takagari Trader rating Join Date: Sep 2008 Location: Anola(ish) MB	Well it would suck battery life. And most places wouldn't have the space. LEDs direct all there light into the chamber. Not exactly a light bulb. More along the lines of mini flash lights __________________ Eddie Creek, MB Airsoft Field, Valken Dealer, Local Age Verification [COLOR="DarkOrange"][B]

November 15th, 2011, 21:22	#19
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	a UV laser would be needed. they are dangerous, costly (compared to LED) and bulky. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

November 15th, 2011, 20:04	#17
sabinn Trader rating Join Date: Oct 2010 Location: Toronto	Just for the sake of argument and theorycrafting... Would it be possible to mount a laser as the light source? Do they make a shallow enough emitter? In theory this would give a maximum amount of "charging" to the tracer round in the smallest amount of time. This would be akin to a flash/photocell like the TM supressors employ (as far as charging the bb goes). Only a laser would have the benefit of minimum light bleed from the chamber. Unlike omni directional light sources like LEDS. This is just me thinking out loud. I have no electrical experience. Possible?

December 21st, 2011, 01:41	#20
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	ok time for an update on sabinn's P90 i have completed all the work and everything is working perfectly. though i was not able to run the LEDs off the motor leads due to a gearbox issue that may need to be addressed at a later time by sabinn. i wont go into details about the issues found in the gearbox as the HUTU is what's being discussed here. though it did eat up some time with trouble shooting. i realize that it has been a while since this thread was last updated, and that i have been working on and off sabinn's P90 for a few weeks. i have been working back and forth from Whitby to Toronto for the last 3 weeks and sabinn took a week trip to Alberta on business and to look into his gearbox issues personally. so technically it maybe took me 3-4 days including trouble shooting to complete this mod. now that everything is done and working, i'm going to start a new thread with a detailed step-by-step on what i did and how, along with detailed pictures and parts used. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

April 11th, 2012, 02:05	#21
sabinn Trader rating Join Date: Oct 2010 Location: Toronto	project pics @ http://airsoftcanada.com/showthread.php?t=134179

DIY HUTU for CA P90 Proline (Hop Up Tracer Unit) in Toronto

Doctor's Corner