SRC M4 Takedown

mike909 · April 6th, 2008, 18:56

Hi, I just cant figure out how to takedown my SRC M4. Ive searched but there isnt munch information on SRC. So here are some pictures. Click them to make them bigger.

Donster · April 6th, 2008, 19:03

i believe you have to remove the body pins. the one just behind the selector switch, and the other underneath the foregrip ring(?) or better yet, just underneath the upper receiver. again, this is all from reading, i dont own one, but i believe that is how you are supposed to do it.

mike909 · April 6th, 2008, 19:06

Ive dont that and It doesnt open. There has to be something else to do.

immortalundead · April 6th, 2008, 19:13

this video maybe be of some help http://www.mechbox.com/site/m4/m16-u...bly-video.html

mike909 · April 6th, 2008, 19:15

somewhat....

Do I have to remove my buttstock to do this?

SHaKaL · April 6th, 2008, 19:23

You have to unscrew the front and rear pins... use some force on the upper to get it free
remove the stock bolt and stock
Unscrew the plate under the grip; remove the motor and unscrew the grip.
Remove the center pin and mag release. et voila you have a taken down v2 mechbox

mike909 · April 6th, 2008, 19:24

Quote:

Originally Posted by SHaKaL

yep
as the stock bold on the mechbox

?????

SHaKaL · April 6th, 2008, 19:29

edited content...

mike909 · April 6th, 2008, 19:33

I think im talking about something different than you. I am talking about just splitting the upper and lower parts of the gun. Im not upgrading or anything. I just dont know how to get it so im trying to figure it out now for future references

SHaKaL · April 6th, 2008, 19:40

You just have to unscrew the front and rear pin then and remove them. Use some force to lift the upper receiver. Thats all.

immortalundead · April 6th, 2008, 19:42

just a warning though, i hear there is a risk of breaking those tabs, so if your just taking it apart for looks, maybe wait till it needs repairs, thats only from what ive heard thought. my classic army just slides forward, so i dont have to worry about the tabs

mike909 · April 6th, 2008, 19:47

I took the pins out and would I be able to give oo much force because I dont want any damage

ex · April 6th, 2008, 19:48

Is it a metal body or plastic?

mike909 · April 6th, 2008, 19:49

Quote:

Originally Posted by ex-royal

Is it a metal body or plastic?

Metal

ex · April 6th, 2008, 19:57

ahhhh ok...well then this is a whole new animal. You have to basically take everything off to get at the Mechbox. Start at the front and remove the hand guards and barrel. Now go to the back and remove the butt stock. next take the pistol grip off. Now pull the upper up and away from the lower while pulling the cocking handle back to clear the top of the mechbox. Don't forget the mechbox center pin.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 6th, 2008, 18:56	#1
mike909 Banned Trader rating Join Date: Jul 2007 Location: Ontario, Hamilton area	SRC M4 Takedown Hi, I just cant figure out how to takedown my SRC M4. Ive searched but there isnt munch information on SRC. So here are some pictures. Click them to make them bigger.

April 6th, 2008, 19:15	#5
mike909 Banned Trader rating Join Date: Jul 2007 Location: Ontario, Hamilton area	somewhat.... Do I have to remove my buttstock to do this? Last edited by mike909; April 6th, 2008 at 19:18..

April 6th, 2008, 19:23	#6
SHaKaL Trader rating Join Date: Jan 2005 Location: Trois-Rivi?res	You have to unscrew the front and rear pins... use some force on the upper to get it free remove the stock bolt and stock Unscrew the plate under the grip; remove the motor and unscrew the grip. Remove the center pin and mag release. et voila you have a taken down v2 mechbox __________________ HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH Last edited by SHaKaL; April 6th, 2008 at 19:28..

April 6th, 2008, 19:03	#2
Donster Trader rating Join Date: Jul 2007 Location: GTA	i believe you have to remove the body pins. the one just behind the selector switch, and the other underneath the foregrip ring(?) or better yet, just underneath the upper receiver. again, this is all from reading, i dont own one, but i believe that is how you are supposed to do it.

April 6th, 2008, 19:06	#3
mike909 Banned Trader rating Join Date: Jul 2007 Location: Ontario, Hamilton area	Ive dont that and It doesnt open. There has to be something else to do.

April 6th, 2008, 19:13	#4
immortalundead Trader rating Join Date: Sep 2006 Location: Cookshire-Eaton, Qc	this video maybe be of some help http://www.mechbox.com/site/m4/m16-u...bly-video.html

April 6th, 2008, 19:29	#8
SHaKaL Trader rating Join Date: Jan 2005 Location: Trois-Rivi?res	edited content... __________________ HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH

April 6th, 2008, 19:33	#9
mike909 Banned Trader rating Join Date: Jul 2007 Location: Ontario, Hamilton area	I think im talking about something different than you. I am talking about just splitting the upper and lower parts of the gun. Im not upgrading or anything. I just dont know how to get it so im trying to figure it out now for future references

April 6th, 2008, 19:40	#10
SHaKaL Trader rating Join Date: Jan 2005 Location: Trois-Rivi?res	You just have to unscrew the front and rear pin then and remove them. Use some force to lift the upper receiver. Thats all. __________________ HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH

April 6th, 2008, 19:42	#11
immortalundead Trader rating Join Date: Sep 2006 Location: Cookshire-Eaton, Qc	just a warning though, i hear there is a risk of breaking those tabs, so if your just taking it apart for looks, maybe wait till it needs repairs, thats only from what ive heard thought. my classic army just slides forward, so i dont have to worry about the tabs

April 6th, 2008, 19:47	#12
mike909 Banned Trader rating Join Date: Jul 2007 Location: Ontario, Hamilton area	I took the pins out and would I be able to give oo much force because I dont want any damage

April 6th, 2008, 19:48	#13
ex Wanna buy some Nod's? #StolenValour Trader rating Join Date: Aug 2005 Location: Ottawa	Is it a metal body or plastic? __________________ ΜΟΛΩΝ ΛΑΒΕ

April 6th, 2008, 19:57	#15
ex Wanna buy some Nod's? #StolenValour Trader rating Join Date: Aug 2005 Location: Ottawa	ahhhh ok...well then this is a whole new animal. You have to basically take everything off to get at the Mechbox. Start at the front and remove the hand guards and barrel. Now go to the back and remove the butt stock. next take the pistol grip off. Now pull the upper up and away from the lower while pulling the cocking handle back to clear the top of the mechbox. Don't forget the mechbox center pin. __________________ ΜΟΛΩΝ ΛΑΒΕ

SRC M4 Takedown

Airsoft Guns Discussion