DBoy magazine faulty

Mogrok · March 30th, 2011, 19:39

Hello, I just received several brand new 68 rnd metal M4 magazines (Dboy) and in all of them the top piece comes out with little to no force at all(even if I turn the mag upside down) the clips appear to be in the side holes but they are not grabbing.

Any ideas how to fix this? I was just thinking about using crazy glue.

Azathoth · March 30th, 2011, 19:54

I"m confused, Are you talking about the BB follower falls out of the mag? Or that the BB follower sticks out of the magazine a little (which is normal)

AngelusNex · March 30th, 2011, 19:56

Try something less permanent first, as you may need to open them up in the future to fix say, a shattered bb.

I'd try wrapping it in enough electrical tape till it fits tightly.

m102404 · March 30th, 2011, 22:26

Take the plastic insert out of the mag (easy to do since it's basically falling out as you describe).

Squeeze the sides of the metal shell together a bit (or a lot depending on how bad the fit is).

Reinsert the plastic insides of the magazine.

Mogrok · April 4th, 2011, 13:03

Thanks for the advice I contacted the company and they are going to let me return them.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 30th, 2011, 19:39	#1
Mogrok Trader rating Join Date: Feb 2008 Location: Belleville, ON	DBoy magazine faulty Hello, I just received several brand new 68 rnd metal M4 magazines (Dboy) and in all of them the top piece comes out with little to no force at all(even if I turn the mag upside down) the clips appear to be in the side holes but they are not grabbing. Any ideas how to fix this? I was just thinking about using crazy glue.

March 30th, 2011, 19:56	#3
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	Try something less permanent first, as you may need to open them up in the future to fix say, a shattered bb. I'd try wrapping it in enough electrical tape till it fits tightly.

March 30th, 2011, 22:26	#4
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Take the plastic insert out of the mag (easy to do since it's basically falling out as you describe). Squeeze the sides of the metal shell together a bit (or a lot depending on how bad the fit is). Reinsert the plastic insides of the magazine.

April 4th, 2011, 13:03	#5
Mogrok Trader rating Join Date: Feb 2008 Location: Belleville, ON	Thanks for the advice I contacted the company and they are going to let me return them.

DBoy magazine faulty

Doctor's Corner