|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 16th, 2013, 14:26
|
#1 |
|
g&p m4 motor issues
so i went ahead and took off my pistol grip on my g&p m4 to be spray painted, when i put it back on and tested it it seems that my motor made a clicking noise and the piston made a half cycle and stopped, i tried pressing the trigger again and it just refused to cycle, whats wrong? how do i fix it?
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
|
|
February 16th, 2013, 14:30
|
#2 | |
|
There is a screw under your pistol grip to adjust how far your motor goes, maybe you screwed it too tight?
__________________
Quote:
|
|
|
|
|
|
February 16th, 2013, 14:45
|
#3 |
|
|
nope. never changed adjustments. i did try adjusting it without the bottom cap and what seemed is that even with a good adjustment it still fails to fire
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets Last edited by solidgear34; February 16th, 2013 at 14:53.. |
|
|
|
|
February 16th, 2013, 15:07
|
#4 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
try someone elses battery
|
|
|
|
|
February 16th, 2013, 15:32
|
#5 |
|
|
found out the problem! my motor was put in the wrong way! thank you all for those who helped
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
