M203 shell problem- Problem solved! wahooooooooo!

Dozer_01 · October 30th, 2005, 21:04

Hey guys,

I just got a few shells and being the curious guy i am, i decided to unscrew the silver from the brass part. Little bearing came out of it. I have all the parts that came out. Ive spent over 3 hours (no joke) trying to get the bearings to stay in there and screw the outer shell on.

Has this happened to anyone before? Is it fixable? Any clues?

Appreciate it.

ILLusion · October 31st, 2005, 17:17

Yeah, I've had it happen to me before as well.

Same deal. Just being curious, I opened her up ... and PLAM!! a shit load of ball bearings went scattering across my desk, floor, behind wires, across my room...

Took me 3 hours to find them all back.

BLACKFLY · October 31st, 2005, 17:23

TIP: use a little heavy weight silicon oil to hold them in place.

BloodSport · October 31st, 2005, 17:29

heh heh Matt, I warned you to be careful when you opened them!

I found my loading tool for them, I'll ship it out to you tomorrow when I get to Ottawa, it helps keep them in place when you are loading and such.

Dozer_01 · October 31st, 2005, 21:10

I took at look at this tool on the internet and figured out that i needed to hold down the piston thing, then screw on the other part of the shell....then pull back on the pen and let the little circlular thing at the back of the shell, pop into place. I can do it in abour 2 minutes now, all i needed was a bic pen

....lol

BloodSport · October 31st, 2005, 21:46

yeah the tool is handy for getting the bearings back in as it blocks all the openings except the one your putting the bearings into.

PeaceCorpse · November 2nd, 2005, 18:41

Does anyone know where I can get new bearings for my 203 shell? I did the same thing as you did but I wasn't so lucky. And the tool you are talking about..... can you send the link for it?

Thanks

Peace Corpse

BloodSport · November 2nd, 2005, 18:43

http://www.specarms.com/products/displayItem.php?id=240

PeaceCorpse · November 4th, 2005, 00:19

I found that BC Bearings carries 3mm balls, but I have to buy 100 minimum. But they are only $0.21each. So I will now have lots of mistake recoveries. LOL

Dozer_01 · November 4th, 2005, 00:33

That alot of balls. Can you handle all 100 balls?

PeaceCorpse · November 6th, 2005, 00:48

Hey they are small enough. LOL
Maybe I'll add a few to each load out until the are all gone(Just kidding)

Quote:

Originally Posted by Dozer_01

That alot of balls. Can you handle all 100 balls?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 30th, 2005, 21:04	#1
Dozer_01 Trader rating Join Date: Sep 2003 Location: Ontario	M203 shell problem- Problem solved! wahooooooooo! Hey guys, I just got a few shells and being the curious guy i am, i decided to unscrew the silver from the brass part. Little bearing came out of it. I have all the parts that came out. Ive spent over 3 hours (no joke) trying to get the bearings to stay in there and screw the outer shell on. Has this happened to anyone before? Is it fixable? Any clues? Appreciate it. __________________ LLTP

October 31st, 2005, 17:17	#2
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Yeah, I've had it happen to me before as well. Same deal. Just being curious, I opened her up ... and PLAM!! a shit load of ball bearings went scattering across my desk, floor, behind wires, across my room... Took me 3 hours to find them all back. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

October 31st, 2005, 17:23	#3
BLACKFLY Trader rating Join Date: Jun 2002 Location: Toronto	TIP: use a little heavy weight silicon oil to hold them in place. __________________ Deadpool brings the funk.

October 31st, 2005, 17:29	#4
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	heh heh Matt, I warned you to be careful when you opened them! I found my loading tool for them, I'll ship it out to you tomorrow when I get to Ottawa, it helps keep them in place when you are loading and such. __________________ Saskatchewan Age Verifier! Contact for more Info.

October 31st, 2005, 21:10	#5
Dozer_01 Trader rating Join Date: Sep 2003 Location: Ontario	I took at look at this tool on the internet and figured out that i needed to hold down the piston thing, then screw on the other part of the shell....then pull back on the pen and let the little circlular thing at the back of the shell, pop into place. I can do it in abour 2 minutes now, all i needed was a bic pen ....lol __________________ LLTP

October 31st, 2005, 21:46	#6
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	yeah the tool is handy for getting the bearings back in as it blocks all the openings except the one your putting the bearings into. __________________ Saskatchewan Age Verifier! Contact for more Info.

November 2nd, 2005, 18:41	#7
PeaceCorpse Trader rating Join Date: Aug 2005 Location: Calgary AB	Does anyone know where I can get new bearings for my 203 shell? I did the same thing as you did but I wasn't so lucky. And the tool you are talking about..... can you send the link for it? Thanks Peace Corpse

November 2nd, 2005, 18:43	#8
BloodSport Traveling Man Trader rating Join Date: Aug 2001 Location: Moose Jaw, Saskatchewan	http://www.specarms.com/products/displayItem.php?id=240 __________________ Saskatchewan Age Verifier! Contact for more Info.

November 4th, 2005, 00:19	#9
PeaceCorpse Trader rating Join Date: Aug 2005 Location: Calgary AB	I found that BC Bearings carries 3mm balls, but I have to buy 100 minimum. But they are only $0.21each. So I will now have lots of mistake recoveries. LOL

November 4th, 2005, 00:33	#10
Dozer_01 Trader rating Join Date: Sep 2003 Location: Ontario	That alot of balls. Can you handle all 100 balls? __________________ LLTP

M203 shell problem- Problem solved! wahooooooooo!

Doctor's Corner