Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Maruzen M1100 GBB Stock ver or TM M3 Super 90?

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old November 14th, 2005, 02:09   #1
CanIplayDaddy
 
Join Date: May 2005
Location: sg
Maruzen M1100 GBB Stock ver or TM M3 Super 90?

Hi i would like some advice, im thinking of getting either the m1100 or the m3 but am still not able to decide which one to get.

For the M1100, i must admit im very into realism and the Maruzen with semi-auto action is a big pull factor, coupled with the fact that with semi auto it can shoot much faster than the M3. Also, I will probably be playing a mix of CQB and open area skirmish so I think this suits me as well as the M3.

But it is twice the m3 price, and its not very powerful, and since there are very limited reviews of the M1100 on the net so Im not able to gather much info on it. BTw anybody knows if it can use TOP gas?

Since this will be my first shotgun, Im also a bit hazy about how the mechanism for the Tm M3 SUper 90 works, is it load 3 shells full of BBs, then pump and shoot, pump and shoot all those 3 shells away one at a time? then reload 3 new shells and repeat the process?

thx for any help.
CanIplayDaddy is offline   Reply With Quote
Old November 14th, 2005, 03:25   #2
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
TM shotguns loads 1 shell only, which actually functions like an AEG's mag. It holds 30 BBs, which is enough for 10 shots since each pump of a TM shotty loads 1 BB into each of the 3 barrels.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old November 14th, 2005, 06:35   #3
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
The M3 has 3 barrels. The shell has 30 BB. For each shell, you can shoot 10 times 3 BB per pull.
Then you manually change the shell. Think of the shell as a magazine instead of a round.
The advantage of the M3 is dependability in any weather.
Greylocks is offline   Reply With Quote
Old November 14th, 2005, 10:09   #4
Tankdude
 
Join Date: Jan 2005
Location: East Coast, New Brunswick
The M110 can be used with external air, there is an article about it on classicairsoft.net.

That takes care of the power issue. You can shoot a full load of 10 bb's without a drop in power.

I would use the M1100 inside so you can get the shells back and keep them out of the mud.

M3 would be better outside because of it mag type shells and accuracy.
Tankdude is offline   Reply With Quote
Old November 14th, 2005, 10:28   #5
Penguin
Propaganda Minister
R.I.P. ???? - 2012
 
Penguin's Avatar
 
Join Date: Dec 2001
Location: Toronto
Send a message via ICQ to Penguin
You can just use a shell catcher to prevent shells from getting lost. Basically most everything in airsoft is personal preference, try them both and see which one you like best.
__________________
History Major Cagematch : The worlds most boring fight
Penguin is offline   Reply With Quote
Old November 14th, 2005, 15:21   #6
HGI
 
HGI's Avatar
 
Join Date: Dec 2003
Location: Nanaimo
I own the M3 as my primary. Great gun, light and easy to get around with it. Though I would love a gas shotgun like MadMax's
__________________
Quote:
Originally Posted by Lisa
Forums are a repository for info, not spoon feeding your sorry ass.
HGI is offline   Reply With Quote
Old November 14th, 2005, 17:06   #7
TheToastmaster
 
TheToastmaster's Avatar
 
Join Date: Jan 2005
Location: Winnipeg. In a hole.
I'll put a reccomendation in for the M3 too. I've been playing for just over a year, and have used mine as a primary for about 80% of that time.
For CQB, it's my favourite weapon I've used, and deadly accurate within around 30ft.
For outdoors skirmishes, it's excellent as well, with about the range of a stock AEG, thougth you will find yourself outgunned by upgraded AEGs.
I don't recall, but if the M1100 is the one that you can load between 1 and 10 bbs into each shell and it fires a shell at a time (more realistically), then I wouldn't reccomend it unless you plan to have a shell bag on the side to keep from losing your shells. Even then, I don't believe it has good range for outdoors games at all, unless the field you'll be playing at has pretty tight cover.
Basically the M1100 is more like a shotgun; the M3 acts more like a bolt action carbine, the grouping is tight, and it's quite accurate, with a slower rate of fire (which is more practical for airsoft, but not as realistic).
__________________
Toast
TheToastmaster is offline   Reply With Quote
Old November 14th, 2005, 18:22   #8
Zanzibarbarian
 
Zanzibarbarian's Avatar
 
Join Date: Oct 2003
Send a message via MSN to Zanzibarbarian
Why not get the best of both worlds and get a Marushin M500?
Zanzibarbarian is offline   Reply With Quote
Old November 14th, 2005, 18:37   #9
CanIplayDaddy
 
Join Date: May 2005
Location: sg
thanks for all the inputs. for the marushin m500 i rather not start getting 8mm BBs just for it, not to metion the higher cost, although it does look impressive, the M3's power combined with the M1100's semi auto action.

Anybody who owns the m1100 here care to share? Or is it that uncommon as i think it is. Are there are market upgrades for it specfically to increase its power?

Anyway thanks for all the info so far!
CanIplayDaddy is offline   Reply With Quote
Old November 14th, 2005, 18:44   #10
Shinjin_MC
 
Join Date: Dec 2003
Location: sauga, on
Send a message via MSN to Shinjin_MC
or get the m1100 that does not require the shells
there are 2 or 3 variants that are not shell ejecting
Shinjin_MC is offline   Reply With Quote
Old November 15th, 2005, 07:41   #11
Zanzibarbarian
 
Zanzibarbarian's Avatar
 
Join Date: Oct 2003
Send a message via MSN to Zanzibarbarian
And just so you know, although they're now slightly more difficult to locate, there are 6mm Marushin M500s...and boy are they sweet!
Zanzibarbarian is offline   Reply With Quote
Old November 15th, 2005, 07:50   #12
Skruface
 
Skruface's Avatar
 
Join Date: Jan 2002
Quote:
Originally Posted by Shinjin_MC
or get the m1100 that does not require the shells
there are 2 or 3 variants that are not shell ejecting
The m1100 "Majazine-type" uses no shells, but rather an internal mag. However, Sundown used to have on of these and had constant problems with the piston head going to shit, and can't find replacement parts. It's been a wicked-looking wall hangar for 2+ years.
__________________
Quote:
Originally Posted by TokyoSeven View Post
That was a very bad move on your behalf. Sort of like cutting off your foot for money, but not getting the money first and then letting the person with the money run away.
Quote:
Originally Posted by MadMorbius View Post
Liberals rely on emotion. Conservatives rely on evidence, and the Socialists rely on everyone else.
Skruface is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 23:58.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.