|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 25th, 2006, 14:26
|
#1 |
|
ICS M4 Switch Assembly.
Hi guys, I got a little problem with my ICS M4a1, my switch assembly is broken, I would like to know if that item would resolve my problem?? And if it will fit my ICS M4? I found it on http://www.dentrinityshop.com/pr_lis...G_SMA&bid=ZSOT
ZS-07-15 Product Name Systema Low Resistance Switch Assembly Description For Gearbox Version 2 Except XM177 & CAR15 thanks for looking! |
|
|
|
|
April 26th, 2006, 09:37
|
#2 |
|
let me guess it burnt out? happened to me, you can find an ICS replacement switch on WGC but it looks like its sold out right now. if the systema switch is the same as the stock TM switch it wont fit right , I tried swaping in one only to find the ICS one has something different so all I did was swap the contact points and wires from one to the other, try to find someone who is selling off butcher parts from a mechbox and try that rout could save you some money.
__________________
|
|
|
|
|
April 29th, 2009, 05:32
|
#3 |
|
sorry for digging. can anyone confirm that the systema switch assembly fits nice (or not) in the ICS M4 ?
|
|
|
|
|
April 29th, 2009, 06:36
|
#4 |
|
Just so you know, we're stocking ICS parts in our warehouse. Oddly enough, the switch assembly is currently out of stock. PM me to find out our next shipment date, or we can fly one in for you. http://www.mach1airsoft.com/web/cata...p?cat=4&page=2
shinobii
__________________
Premier Pro-Grade Canadian AEG supplier http://www.mach1airsoft.com/ sales@mach1airsoft.com Like Us on FACEBOOK Follow Us on Twitter  Store Hours of Operation: Tue-Wed: 11:00am-5:00pm Thurs: 11:00am-8:00pm Fri: 11:00am-5:00pm Sat: 10:00-5:00pm Retail Store Address: 237 Toryork Drive, Toronto Ontario. |
|
|
|
|
April 29th, 2009, 07:36
|
#5 |
|
Just a heads up .. I have a G&P Switch assembly and it will work.. ICS does not have a proprietary switch assembly, Its a V.2 Assembly. Now as per the Selector plate. I did notice that they are made a bit differently. G&P Switch Assembly off of Airsoftparts.ca is a good buy. it gets rid of the crappy contacts for the switch plate for less arcing problems and burnouts of the switch.
But yes any V.2 Switch assembly will work in your ICS so that systema one will work but its very overrated.
__________________
No Comment. |
|
|
|
|
April 29th, 2009, 10:07
|
#6 |
|
|
since i am getting a new switch assembly i plan to install it with a primitive mosfet solution. i have decided to go for the G&P switch assembly, but not sure what to do with the selector plate? should i get a G&P selector plate just in case? it isnt that expensive.
my current list: gp switch assembly: http://shop.ehobbyasia.com/upgrade-p...16-series.html gp selector plate: http://shop.ehobbyasia.com/gandp-pol...16-series.html |
|
|
|
|
April 29th, 2009, 10:43
|
#7 |
|
|
your current selector plate in the ics is fine..
The contacts on the selector plate are useless as the G&P bridges the connection already so you dont have to worry about that..
__________________
No Comment. |
|
|
|
|
April 29th, 2009, 13:48
|
#8 |
|
I also have the G&P switch in my ICS and it required a little modification to fit, but nothing too extreme. This is definately a weak point in the ICS and I recommend it to anyone that's using an ICS with a few years under its belt.
__________________
  
|
|
|
|
|
April 29th, 2009, 14:38
|
#9 |
|
|
Odd that you needed to modify it.. they fit right in there.
__________________
No Comment. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
