GBB M4's: WA | Inokatsu | WE

dragwindsor · February 24th, 2009, 14:44

Quote:

Originally Posted by hongkong100

there won't be a video on how too smash one yet if i can come up with the money first

Why not?

Dragate · February 24th, 2009, 15:10

are you serious?
you're going to smash it?

dood I"ll pay you to keep it LOL

dragwindsor · February 24th, 2009, 15:18

Quote:

Originally Posted by Dragate

are you serious?
you're going to smash it?

dood I"ll pay you to keep it LOL

It's just sitting here in the box.

Might as well have some fun with it.

Nabisco_Lobstrosity · February 24th, 2009, 15:35

Inokatsu and Western Arms M4 GBB's use the same internal system. The Inokatsu M4's have the edge on external quaility, however, and that's why they're retailing more expensive. I don't know of any parts that can't be swapped between them. The G&P ones are just WA M4's with the G&P aftermarket parts installed.

A 'better' gun is hard to nail down. If cost-efficiency is a higher priority than realism, then maybe a WE GBB is the way to go. If you want to invest time and money to make it perfect, or maybe realism is a huge priority for you, then you'd want to start off with an Ino / WA.

They all have blowback and they're all wicked fun to use. They all require more money and care than an average AEG. The rest pretty much comes out in the wash.

Look at your budget, look at the kinds of aftermarket parts available to you, read some of the failures / successes other owners have run into, and spend a lot of time on GasGunsDotInfo. I wouldn't discourage anyone from getting any particular brand of GBB.

KEVORKIAN · February 24th, 2009, 16:43

Quote:

Originally Posted by dragwindsor

It DOES drop into the stock Ino loading nozzle.

Are you sure!!!
According to the RA-Tech website it only fits the Ra-Tech bolt...and if that's the case then you are going to need the RA-Tech bolt carrier as well!
The one thing I hate about the INO bolt/carrier is that they are brand specific and NOT compatible with the WA or Prime bodies!

Dragate · February 24th, 2009, 18:03

Quote:

Originally Posted by dragwindsor

It's just sitting here in the box.

Might as well have some fun with it.

nuuuuuuuuuuuuuuuuu 800 dorras yo
almost 900 how could u do such a thing

Quote:

Originally Posted by Nabisco_Lobstrosity

Inokatsu and Western Arms M4 GBB's use the same internal system. The Inokatsu M4's have the edge on external quaility, however, and that's why they're retailing more expensive. I don't know of any parts that can't be swapped between them. The G&P ones are just WA M4's with the G&P aftermarket parts installed.

A 'better' gun is hard to nail down. If cost-efficiency is a higher priority than realism, then maybe a WE GBB is the way to go. If you want to invest time and money to make it perfect, or maybe realism is a huge priority for you, then you'd want to start off with an Ino / WA.

They all have blowback and they're all wicked fun to use. They all require more money and care than an average AEG. The rest pretty much comes out in the wash.

Look at your budget, look at the kinds of aftermarket parts available to you, read some of the failures / successes other owners have run into, and spend a lot of time on GasGunsDotInfo. I wouldn't discourage anyone from getting any particular brand of GBB.

oh wow kk
I think I'll do the same as I did for my aeg then. Build from the ground up!

Quote:

Originally Posted by KEVORKIAN

Are you sure!!!
According to the RA-Tech website it only fits the Ra-Tech bolt...and if that's the case then you are going to need the RA-Tech bolt carrier as well!
The one thing I hate about the INO bolt/carrier is that they are brand specific and NOT compatible with the WA or Prime bodies!

ya that's what I heard on gasgun.info as well. *sigh*
Time to read lots and lots..>~~~

incrediboy729 · February 24th, 2009, 18:04

Quote:

Originally Posted by dragwindsor

It's just sitting here in the box.

Might as well have some fun with it.

I know someone who could have a lot more of fun with it

............

dragwindsor · February 24th, 2009, 18:05

The smashing is a direct result of MAD lowballers, and lack of interest.

Dragate · February 24th, 2009, 18:11

Quote:

Originally Posted by dragwindsor

The smashing is a direct result of MAD lowballers, and lack of interest.

well...........................

i was told to build my gbb from ground up
so I'm not sure If i shoudls pend the money on that wa?
I need to do some more research before making a descision
Wait up ilke a week beofre smashing?
Next week I"ll have another liek 2.5k to spend on my airsoft =]

dragwindsor · February 24th, 2009, 18:14

We can't discuss this openly here.

But.

You CAN build one from scratch if you'd like, but if you just want a fieldable one, and not an uber realistic collector one, a WA with a few steel internals is a good deal.

Just to let you know, metal bodies are ATLEAST $300.

dragwindsor · February 24th, 2009, 18:20

Quote:

Originally Posted by KEVORKIAN

Are you sure!!!
According to the RA-Tech website it only fits the Ra-Tech bolt...and if that's the case then you are going to need the RA-Tech bolt carrier as well!
The one thing I hate about the INO bolt/carrier is that they are brand specific and NOT compatible with the WA or Prime bodies!

The website was updated.

When it first came up, it didn't say the " Only mate to RA-Tech nAzzle and bolt carrier"

.....yes.....nAzzle.

Dragate · February 24th, 2009, 18:49

Quote:

Originally Posted by dragwindsor

We can't discuss this openly here.

But.

You CAN build one from scratch if you'd like, but if you just want a fieldable one, and not an uber realistic collector one, a WA with a few steel internals is a good deal.

Just to let you know, metal bodies are ATLEAST $300.

whoa... 300 O_O
k i gotta do some calculations tonite LOL

Quote:

Originally Posted by dragwindsor

The website was updated.

When it first came up, it didn't say the " Only mate to RA-Tech nAzzle and bolt carrier"

.....yes.....nAzzle.

LOl

jesster202 · February 24th, 2009, 19:34

u better off with a innio and getting the barrel and then when they relase the fps bolt get that and spend the rest on mag's and cool stuff

aZn_triXta07 · February 24th, 2009, 19:52

You rich mofos!

I'm content with a WE :P

But if I ever get the urge to PUNCH it, who knows

stokes · February 24th, 2009, 19:59

Quote:

Originally Posted by aZn_triXta07

But if I ever get the urge to PUNCH it, who knows

Lmao... hahahaha.

Currently also thinking of building a GBB rifle from the ground up. Prime just made the trigger mechanism for the Prime bodies. But damn its all sold out. Anyone know anywhere else they are selling it?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 24th, 2009, 15:35	#19
Nabisco_Lobstrosity Trader rating Join Date: Jun 2006 Location: Charlottetown, PEI	Inokatsu and Western Arms M4 GBB's use the same internal system. The Inokatsu M4's have the edge on external quaility, however, and that's why they're retailing more expensive. I don't know of any parts that can't be swapped between them. The G&P ones are just WA M4's with the G&P aftermarket parts installed. A 'better' gun is hard to nail down. If cost-efficiency is a higher priority than realism, then maybe a WE GBB is the way to go. If you want to invest time and money to make it perfect, or maybe realism is a huge priority for you, then you'd want to start off with an Ino / WA. They all have blowback and they're all wicked fun to use. They all require more money and care than an average AEG. The rest pretty much comes out in the wash. Look at your budget, look at the kinds of aftermarket parts available to you, read some of the failures / successes other owners have run into, and spend a lot of time on GasGunsDotInfo. I wouldn't discourage anyone from getting any particular brand of GBB. __________________ Nabisco Lobstrosity --------------------

February 24th, 2009, 18:05	#23
dragwindsor Trader rating Join Date: Feb 2008 Location: Windsor, Ontario	The smashing is a direct result of MAD lowballers, and lack of interest. __________________ To save the trouble of Ancorp reading it in every post: Inokatsu

February 24th, 2009, 18:14	#25
dragwindsor Trader rating Join Date: Feb 2008 Location: Windsor, Ontario	We can't discuss this openly here. But. You CAN build one from scratch if you'd like, but if you just want a fieldable one, and not an uber realistic collector one, a WA with a few steel internals is a good deal. Just to let you know, metal bodies are ATLEAST $300. __________________ To save the trouble of Ancorp reading it in every post: Inokatsu

February 24th, 2009, 15:10	#17
Dragate Trader rating Join Date: Oct 2008 Location: Waterloo-Toronto-Ottawa	are you serious? you're going to smash it? dood I"ll pay you to keep it LOL

February 24th, 2009, 19:34	#28
jesster202 Trader rating Join Date: Dec 2007 Location: London Ontario	u better off with a innio and getting the barrel and then when they relase the fps bolt get that and spend the rest on mag's and cool stuff __________________ *MY COLLECTION* *AEG* M4 coustom full metal with king arms metal body //\\ Galaxy MP5 PDW *GAS/SPRING* KJW M9 FULLY UPGRADED //\\KWA FULL SIZE USP //\\ TF MAC11 *GEAR* Coyote Brown CIRAS

February 24th, 2009, 19:52	#29
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	You rich mofos! I'm content with a WE :P But if I ever get the urge to PUNCH it, who knows

GBB M4's: WA | Inokatsu | WE

Airsoft Guns Discussion