TM Glock 17 FRAME issue

Behnken · January 16th, 2011, 23:53

Hello folks,

I'm having some kind of trouble to find information on changing the TM G17 frame to a Guarder one.

In AirosftBaracks.com there's a guide to FULL TAKE DOWN the Glock 17, but when it get's to the frame, total FAIL, some pic links are broken and it's not well explained the whole process to disassembly and reassembly it.

So, if any good samaritan could post a tutorial with pics showing how to do it, I'd be thankful.

SEMPER FI

Att

Behnken

Behnken · January 17th, 2011, 14:28

No one has a good video or photo tutorial on this?

:/

spartan117 · January 17th, 2011, 16:00

Quote:

Originally Posted by Behnken

No one has a good video or photo tutorial on this?

:/

You only posted it today. Be more patient and wait. Those who do have the answers will answer soon enough. They have their own lives to deal with.

juicy · January 17th, 2011, 16:52

I have a pretty good idea how, however, I have no experience with aftermarket frames, so if the mag catch spring isn't already in there, I'd be getting stuck right around then.

But... I'm going to leave this to someone who's actually done this with a Guarder frame. Yes, there are people on ASC who have done this that can help you. Someone will get to this thread sooner or later.

BadMrFrosty · January 17th, 2011, 17:02

I've done it once so far. I've got a completed Glock 17 in a Guarder Frame. I can try to put together instructions for you when I get the chance.

...unless someone can get this done sooner.

surebet · January 17th, 2011, 17:26

A word of warning if you are Canadian and haven't ordered the frame yet, it's the restricted part of the gun so there is an seizure probability.

Behnken · January 17th, 2011, 18:00

I'm from Brazil.

Stealthee · January 17th, 2011, 18:05

Where's Racingmaniac and Qlong, I think they know.

Behnken · January 18th, 2011, 18:51

Racingmaniac and Qlong, where are you?

Qlong · January 18th, 2011, 19:03

I'll post a video, it will be up within the hour.

Done. Post, if you have any questions.

YouTube - TM Glock reassemble

Behnken · January 19th, 2011, 02:40

Great video Qlong! Very elucidative.

I just wonder how the trigger plate goes into the rear trigger mech.
Is there only one hole, but there's any trick inside, or just putting it there will solve the question.

I saw that you put it in place turning it a bit, and then going to the corret direction.

That's my only doubt.

Thank you!

BadMrFrosty · January 19th, 2011, 18:53

Qlong to the rescue. In video form and sooner than I could write one up. Glad someone was able to help as I couldn't seem to find the time.

juicy · January 19th, 2011, 19:25

The way I do it is line up the trigger bar (with trigger installed in front half of inner frame) with sear (installed in rear half of frame). Then fit them into the frame at the same time, adding the trigger bar return spring thing at the last second.

I can't quite figure out how Qlong does it that way, TBH. I find doing it that way too frustrating, though maybe it comes with practice?

BTW, nicely done, Qlong. Great clip for use by anyone with reassembly questions of the TM Glock series.

Qlong · January 19th, 2011, 19:59

Quote:

Originally Posted by Behnken

Great video Qlong! Very elucidative.

I just wonder how the trigger plate goes into the rear trigger mech.
Is there only one hole, but there's any trick inside, or just putting it there will solve the question.

I saw that you put it in place turning it a bit, and then going to the corret direction.

That's my only doubt.

Thank you!

I made another vid for your question.

I hope this is what you are asking.

Refer to the video by the specific time for easier reference next time.

YouTube - TM Glock Assembly detail

RacingManiac · January 19th, 2011, 22:58

Looks like this is taken care of...lol

I don't have any good ways of making video, so its hard for me to do this...

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 16th, 2011, 23:53	#1
Behnken Trader rating Join Date: May 2010	TM Glock 17 FRAME issue Hello folks, I'm having some kind of trouble to find information on changing the TM G17 frame to a Guarder one. In AirosftBaracks.com there's a guide to FULL TAKE DOWN the Glock 17, but when it get's to the frame, total FAIL, some pic links are broken and it's not well explained the whole process to disassembly and reassembly it. So, if any good samaritan could post a tutorial with pics showing how to do it, I'd be thankful. SEMPER FI Att Behnken

January 17th, 2011, 17:02	#5
BadMrFrosty Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	I've done it once so far. I've got a completed Glock 17 in a Guarder Frame. I can try to put together instructions for you when I get the chance. ...unless someone can get this done sooner. __________________ "If you take sexual advantage of her, you're going to burn in a very special level of hell. A level they reserve for child molesters and people who talk at the theater." - Sheppard Book Last edited by BadMrFrosty; January 17th, 2011 at 17:09..

January 17th, 2011, 17:26	#6
surebet Vicious MSPaint Wizard Trader rating Join Date: Aug 2004 Location: Longueuil, Quebec	A word of warning if you are Canadian and haven't ordered the frame yet, it's the restricted part of the gun so there is an seizure probability. __________________ Annoyingly good with numbers Stop American Censorship

January 17th, 2011, 14:28	#2
Behnken Trader rating Join Date: May 2010	No one has a good video or photo tutorial on this? :/

January 17th, 2011, 16:52	#4
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	I have a pretty good idea how, however, I have no experience with aftermarket frames, so if the mag catch spring isn't already in there, I'd be getting stuck right around then. But... I'm going to leave this to someone who's actually done this with a Guarder frame. Yes, there are people on ASC who have done this that can help you. Someone will get to this thread sooner or later.

January 17th, 2011, 18:00	#7
Behnken Trader rating Join Date: May 2010	I'm from Brazil.

January 17th, 2011, 18:05	#8
Stealthee a.k.a. cloaked Trader rating Join Date: Oct 2008 Location: Scarborough, ON	Where's Racingmaniac and Qlong, I think they know.

January 18th, 2011, 18:51	#9
Behnken Trader rating Join Date: May 2010	Racingmaniac and Qlong, where are you?

January 18th, 2011, 19:03	#10
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	I'll post a video, it will be up within the hour. Done. Post, if you have any questions. YouTube - TM Glock reassemble __________________ Weee! Last edited by Qlong; January 18th, 2011 at 19:59..

January 19th, 2011, 02:40	#11
Behnken Trader rating Join Date: May 2010	Great video Qlong! Very elucidative. I just wonder how the trigger plate goes into the rear trigger mech. Is there only one hole, but there's any trick inside, or just putting it there will solve the question. I saw that you put it in place turning it a bit, and then going to the corret direction. That's my only doubt. Thank you!

January 19th, 2011, 18:53	#12
BadMrFrosty Trader rating Join Date: Apr 2002 Location: Winnipeg, MB	Qlong to the rescue. In video form and sooner than I could write one up. Glad someone was able to help as I couldn't seem to find the time. __________________ "If you take sexual advantage of her, you're going to burn in a very special level of hell. A level they reserve for child molesters and people who talk at the theater." - Sheppard Book

January 19th, 2011, 19:25	#13
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	The way I do it is line up the trigger bar (with trigger installed in front half of inner frame) with sear (installed in rear half of frame). Then fit them into the frame at the same time, adding the trigger bar return spring thing at the last second. I can't quite figure out how Qlong does it that way, TBH. I find doing it that way too frustrating, though maybe it comes with practice? BTW, nicely done, Qlong. Great clip for use by anyone with reassembly questions of the TM Glock series.

January 19th, 2011, 22:58	#15
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	Looks like this is taken care of...lol I don't have any good ways of making video, so its hard for me to do this... __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

TM Glock 17 FRAME issue

Upgrades & Modifications